Bradawl Carpentry
Click an Image to enlarge (Pop-Up)

Repairs

We offer a wide range of repair services.

Internal

Ranges from damaged and old furniture to old kitchen draws such as the one in the picture.

Before
After


The existing draw was replaced using a solid metal draw/runner and an 18mm laminated chip board base to give a solid finish that can be used for years to come.

External

Ranges from rotten windows to rotten pillars. Even if the rot is on a listed building there are products available that would allow us to replace the rot where required without altering the appearance of the building in question.

We use a high quality repair resin system in conjunction with new timber which can be sanded down on completion for immaculate results.

Rotten wood has been replaced to seamlessly match the existing pattern. This can then be painted.

Go Back to Our Work

Further information appears here.The decorative feature around a doorframe usually nailed directly to the frame.A round moulding shape on timber or MDF. Usually machined into the timber in a factory.A shaped moulding on timber or MDF. Usually machined into the timber in a factory.A shaped moulding on timber or MDF. Usually machined into the timber in a factory.Round shaped plugs made out of timber, which can be fitted into screw holes, using glue. These cover the screws and give a more natural appearance.The craftsmen's way of joining two pieces of moulded timber or MDF, giving an attractive angled join. (e.g. skirting boards around an external corner.)The craftsmen's way of joining two pieces of moulded timber or MDF, giving an attractive angled join. (e.g. skirting boards which meet at an internal corner.)A joint used to join two pieces of timber along their length.Soft insulation, usually orange in colour, which is used for thermal insulation.Timbers fitted between solid uprights to give extra strength and stability.The general term for stair parts, which includes; spindles, handrails, newel posts, and base rails.A lock, which is fitted inside the structure of a door, therefore giving more security.A thin layer of timber taken from a section around the circumference of a tree.Three layers of timber, which gives a more stable finished board, much less likely to warp than a solid plank, as in plywood. The top layer being the chosen timber (e.g. Oak) which is treated with several layers of hard wearing oil or lacquer.Medium Density Fibre BoardA system that impregnates preservative into timber under pressure.Timbers fitted at the bottom edge of a roof with guttering attached to it.